Electrically Conductive Resin Flooring
High-conductivity resin floors for ATEX hazardous areas, munitions facilities, and environments where rapid static dissipation is a safety-critical requirement.
Conductive vs Dissipative Flooring
Electrically conductive flooring (surface resistivity 10⁴–10⁶ ohms) provides faster static dissipation than ESD-dissipative systems. This is required in ATEX-classified hazardous areas, munitions and explosives facilities, and environments where even momentary static build-up poses an ignition risk.
Prime Industrial installs conductive resin floors to DSEAR and ATEX requirements, with copper tape earthing grids and full resistivity documentation. Our systems are available in epoxy, polyurethane, and MMA formulations to suit the specific chemical and mechanical demands of your facility.
Key Performance Benefits
ATEX & DSEAR Compliant
Installed to hazardous area regulations with full resistivity testing and documentation.
Rapid Static Dissipation
Surface resistivity 10⁴–10⁶ ohms ensures immediate charge dissipation to earth.
Copper Earthing Grid
Embedded copper tape grid provides consistent conductivity across the entire floor area.
Chemical Resistant
Resists fuels, solvents, and chemicals present in hazardous industrial environments.
Durable Under Traffic
Full industrial floor performance alongside electrical conductivity properties.
Full Documentation
Resistivity test certificates and installation records provided for compliance files.
Typical Applications
ATEX Hazardous Areas
Zones 1, 2, 21, and 22 where flammable vapours, gases, or dusts are present.
Munitions & Explosives
Facilities handling explosives, propellants, or pyrotechnic materials.
Fuel Storage & Dispensing
Fuel depots, tanker loading areas, and aviation refuelling facilities.
Chemical Processing
Plants handling flammable solvents, gases, or reactive chemicals.
ATEX conductive floor specification
DSEAR compliant · Full resistivity documentation · Free survey